Products CategoriesEpson printer & inkLarge Format Sublimation PaperSublimation Transfer PaperT-Shirt Transfer PaperDye Sublimation Ink
420*1700mm Roll To Roll Sublimation Heat Transfer Machine
Rotary heat press machine is special design for those large but roll products, such as fabric, textile, curtain, mouse
pad, etc sublimation by oil roller drum heating, roller drum and fabrics should be same speed. our this size 420x1700mm printing
speed can reach 4-5 meter per minute.
1) The electric control adopts latest technology that allows separation of the machine body and the blanket automatic,with a power failure protection functions.
2) It is applicable to all over or piece hot press, with a 2-3 times higher work efficiency.
3) Electronic digital terminal temperature control and motor frequency conversion digital speed regulation, with high accuracy (±1-2°C).
4) Drum surface with chrome plating, high hardness and good printing performance, wearable and stickiness-proof.
5) It adopts advanced oil-warming technology and liquid circular heat conduction, with even heating and high thermal conductivity.
6) External oil-filling tank and auto-close valve make it convenient to change heat transfer.
7) A design of pneumatic pressure system make rotary printing machine do perfect transfer.
8) Can let the blanket to be automatic correction, ensure the normal orbit, make the efficiency of heat transfer enhancement and the transfer quality guaranteed.
Roller heat press machine maintenance
un-stop working and stop working
could use small copper wire brushes brush away at the roller point. If it doesn't brush away, stop the machine
working and then removed it.
doesn't roughing, stop the machine working and send it to the carving workshop repair.
It's rarely found this breakdown in chrome plated roller.
both sides, or adjust the spacing between axis and roller, don't to make it too much tight.
and nut in time.
temperature and the cloth dryness.
tension device in time, make sure supply proper tension.
you should stop the machine working to rasp it.
and knot in a head on one side, loosen the heavy hummer which hung on the doctor blade, hold on the another
side of welt cloth, swept from the knife edge, it is much easy clean the knife edge.
straight the pattern, at this time, you should stop the machine working, tear down the roller, pad the knife paper,
re-install & tight it.
the fabric twine to other parts, it will cause big accident, you should stop the machine working and breakdown handing
the bearing, you should stop the machine working, change another axis and add lubrication grease
in time, and release all pressure of roller
large banners,flags,T-shirt,nonwoven fabrics,apparel fabrics,towels,blankets,mouse pads and other products in the piece,
especially the continuous transfer of the cloth.
Capable of continuous printing speed, to meet the needs of large volume printing the customer
1) Automatic correction blanket edge